Skip to content

NFC Text record

Overview

The NFC Text record sample shows how to use the NFC tag to expose a text record to NFC polling devices. It uses the NFC Data Exchange Format (NDEF).

When the sample starts, it initializes the NFC tag and generates an NDEF message with three text records that contain the text “Hello World!” in three languages. Then it sets up the NFC library to use the generated message and sense the external NFC field.

The only events handled by the application are the NFC events. The Green LED turns on when an NFC field is present.

Requirements

Before you start, check that you have the required hardware and software:

  • 1x nRF52840 Connect Kit
  • A 13.56MHz NFC Antenna
  • 1x USB-C Cable
  • A smartphone or a tablet with NFC support
  • A computer running macOS, Linux, or Windows 7 or newer

Wiring the NFC antenna

Building the sample

Before you start building, remember to set up the environment first.

Use the following steps to build the NFC Text record sample on the command line.

  1. Open a terminal window.

  2. Go to my-workspace/ncs-playground directory created in the Setting up the environment section.

    1
    cd my-workspace/ncs-playground

  3. Build the sample using the west command, specifying the board (following the -b option) as connectkit_nrf52840:

    1
    west build -p always -b connectkit_nrf52840 samples/nfc/record_text

    Tip

    The -p always option forces a pristine build, and is recommended for new users. Users may also use the -p auto option, which will use heuristics to determine if a pristine build is required, such as when building another sample.

  4. After running the west build command, the build files can be found in build/zephyr.

Flashing the firmware

The sample is designed to work with the UF2 Bootloader, so that you can easily flash the sample using the UF2 Bootloader. The firmware can be found in build/zephyr with the name zephyr.uf2.

To flash the firmware, complete the following steps:

  1. Push and hold the USER button and plug your board into the USB port of your computer. Release the USER button after your board is connected. The RGB LED turns green.

  2. It will mount as a Mass Storage Device called UF2BOOT.

  3. Drag and drop zephyr.uf2 onto the UF2BOOT volume. The RGB LED blinks red fast during flashing.

  4. Reset the board and the sample will start running.

Testing

After flashing the firmware to your board, complete the following steps to test it:

  1. Power up nRF52840 Connect Kit by using the USB-C Cable.
  2. Touch the NFC antenna with the smartphone or tablet and observe that Green LED is lit.
  3. Observe that the smartphone or tablet displays the encoded text (in the most suitable language).
  4. Move the smartphone or tablet away from the NFC antenna and observe that Green LED turns off.