Skip to content

Rapid Prototyping Kit for Your Next-Gen IoT Devices

Powered by the nRF54L15 multiprotocol SoC with Bluetooth LE 6.0, Thread®, Matter, Zigbee®, 4 Mbps proprietary 2.4 GHz mode, NFC and enhanced security. With integrated Inteface MCU for debugging and programming, easy-to-use form factor, flexible power management, and nRF Connect SDK support, you can rapidly prototype next-gen IoT devices.

Quick Start Buy Now

Everything you would expect

  • Powered by nRF54L15 SoC

    nRF54L15 is a ultra-low-power wireless SoC featuring a 128 MHz Arm Cortex®-M33 processor and a 128 MHz RISC-V coprocessor with 1.5 MB NVM and 256 KB RAM. It supports Bluetooth LE 6.0, Thread®, Matter, Zigbee®, 4 Mbps proprietary 2.4 GHz mode, NFC and enhanced security.

  • On-board Interface MCU

    Integrate an nRF52820-based Interface MCU for onboard debugging and programming, eliminating the need for external tools. The Interface MCU also includes a USB-UART bridge for log, trace and terminal emulation, and an Interface Shell to access the board-specific functionality.

  • Easy-to-use Form Factor

    Featuring USB-C, LEDs, Buttons, U.FL receptacles for U.FL cabled 2.4 GHz Antenna and 13.56 MHz NFC Antenna, Arm Serial Wire Debug (SWD) port and dual-row 40 pins with loose or pre-soldered headers available.

  • Flexible Power Management

    Integrated TPS63901 buck-boost converter with 75-nA quiescent current and 1.8V/3.3V configurable power supply for I/Os, supporting various options for easily powering the unit from USB-C, external supplies or batteries.

  • Built on Open Source

    nRF Connect SDK is supported, including the Zephyr RTOS. Developers can explore the full potential of the nRF54L15 using the extensive range of software samples, modules, and libraries available within the nRF Connect SDK.

  • Well Documented

    An extensive set of documentation is available, including getting started and developer guides which can help you save big by reducing development effort. The documentation is hosted as a GitHub repository that allows managing the updates over time.

What's new

  • Introducing Interface MCU

    The Interface MCU enables onboard debugging and programming, eliminating the need for external tools, while enabling access to board-specific features.

    Aug 23, 2025 ・ 3 min read

  • Introducing nRF Connect SDK

    nRF Connect SDK is a scalable and unified software development kit for building low-power wireless applications based on the Nordic Semiconductor wireless devices.

    Aug 22, 2025 ・ 6 min read

  • nRF54L15 Connect Kit Now Available

    Today, we’re thrilled to launch the nRF54L15 Connect Kit, enabling developers to harness the advanced capabilities of Nordic’s nRF54L15 SoC for cutting-edge IoT designs.

    Aug 21, 2025 ・ 5 min read

View all