Skip to content

Assembling

  1. Make sure the M60 keyboard is powered off

  2. Attach the provided 2.4GHz and NFC cabled PCB antennas to the nRF52840 M.2 module as shown in the figure below:

    Attaching Antennas

  3. Insert the module into the connector as shown in the figure below:

    Angle of Insertion

    Angled insertion is allowable and preferred to minimize the insertion force. The angle of insertion is 5° ~ 25°, typically 20°.

    Module Insertion

  4. Secure the module using the provided mounting screw as shown in the figure below:

    Secure the module