Skip to content

Pitaya Go
An Open-Source IoT Development Platform with Multiprotocol Wireless Connectivity

Description

Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B. It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.

Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets. All these features above make this board an ideal choice for the next IoT project.

Features

  • Nordic Semiconductor nRF52840 SoC

    • 64 MHz Arm® Cortex-M4 with FPU
    • 1 MB Flash + 256 KB RAM
    • Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
    • Arm TrustZone® Cryptocell 310 Security Subsystem
    • Integrated USB 2.0 Full-speed Controller
    • QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
    • Integrated NFC-A Tag

  • Microchip ATWINC1500B Wi-Fi Network Controller

    • Shipped with the latest firmware 19.6.1
    • IEEE 802.11 b/g/n 20 MHz (1x1) Solution
    • Extreme low power with Shutdown Control
    • On-Chip Network Stack to Offload MCU
    • Supports Soft-AP
    • Security protocols supported: WPA/WPA2 Personal, TLS/SSL
    • Enterprise Security with WPA/WPA2 (802.11x)
    • Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT

  • 64Mbit ultra-low power QSPI Flash Memory

  • Integrated Li-Po Battery Charger with Power Path Management
  • Additional NFC-A Tag PCB Antenna
  • User programmable RGB LED and Buttons
  • Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
  • Reversible USB-C Connector
  • Li-Po Battery Connector
  • Easily expandable dual 14-Pin Header Sockets
  • Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)

Hardware Diagram

Included in the Box

Part Qty
Pitaya Go Board 1
NFC PCB Antenna 1
USB-C Cable 1

Tutorials

We think the best way to learn is by doing. And to help you get started, we have provided a series of tutorials. Find the details below:

Design Files

Create an Issue

Interested in contributing to this project? Want to report a bug? Feel free to click here: